Machines
Spike CC
Spike CC is the perfect chance to make the most of Alberici products’ quality even when little space is available. Only 23 cm thin, it may be placed virtually anywhere, granting high-security standards and User friendly operation.
Its robust 2,5 mm thick cabinet is endowed with one solid inner bar, compact with 11 reinforced hooks, as well as with a front loop for sturdy padlocks. The stand-alone Spike CC can be fastened to the wall and/or to the floor by fitting its optional slabs; it can also be secured to the floor (or to other machines) by slipping a binding chain (or bar) through the holes pre-set at its base.
Suitable for daily changed amounts of 800/1.100 €
- 2x16LCD display
- Self-configuring p.c. board connecting automatically to the built-in peripherals. Serial ccTalk protocol grants high security standards
- Stainless steel coins pit, for massive or individual coins drop and lockable with key
- Key for refill that allows to reset leftover credit and to manage refill procedures when the machine is closed
- RGB push-buttons with service status color illumination
- Evolution II MIDI multi-denomination counting hopper; coins detection is enhanced by magnetic and optic sensors. CD2 S intelligent 3-way sorter, whose optic sensors check that the coins are not deviated to unwanted paths
- Dispensing hopper single-denomination belt-driven HopperOne S11. As an alternative multi-denomination Hopper AH4 Discriminator II with Smart Pick System (optional)
- Capacity: up to 2.000 mixed coins, thanks to the Sector 100 hopper extension with optic detection of full/empty state
- Front latch and padlock allow to place the machine everywhere, even close to other machines
- Note validator (choose any among: iPRO-RC, capable to recycle up to 200 banknotes [2 denominations], and to stack 400; VEGA-RC2 which recycles up to 60 banknotes [2 denominations], and stacks 30; VEGA-RC able to recycle up to 30 banknotes [1 denomination] and to stack 300
- Armoured cabinet. Preset for binding chain or bar
- Standard or custom-made artwork
Functions
- Manual (2 selecting techniques to choose between) or automatic dispensing of coins and banknotes
- Possibility to inspect the peripherals’ service status
- Handy restoration of preset reserve of coins and banknotes
- Easy managing and display of accounts parameters
- All settings can be customized by the unit Owner/Operator
- GPRS - GSM - GPS (Geo-detection and tracking) Module Kit
- GPRS-GSM Module kit
- ARGO – Telemetry System for Remote control
- Keeper illuminated topper
- Keyboard for menu configuration
- Rielda re-programmable lock
- Wall-mount slab
- Floor-mount slab
- Transport Kit
- Coin collection bin
DIMENSIONED DRAWING
TECHNICAL SPECIFICATIONS
Size | 230 x 1495 x 394 mm |
Weight | 58 Kg |
Voltage | 230 Vac | 50 Hz |
Nominal power | 340 W |
Operation temperature | 0°C ÷ 50°C |
Installation | Floor standing (wall/floor-mount slabs) |
Recycled coins capacity | About 2.000 (Hopper S11) - 1.600 (Hopper AH4) |
Recycled banknotes capacity | Up to 200 |
Stackered banknotes capacity | Up to 400 |
Power supply unit | Power switching 340 W |
Control board | ChangeOne CCS 128K + LCD display 2x16 |
EXPLODED DRAWING
PARTS LIST
REF. | OPT. | COD. | DESCRIPTION |
1 | A-CM0250 | Unit core assembly with door (w/o per. units) | |
2 | P-AM0702-10T | P3 Paper holder with serigraphy | |
3 | AA-0150 | Transport Kit (handle + wheel-cart) | |
4 | 4a | AA-0175 | GPRS-GSM-GPS / Wi-Fi Module Kit - Pin Aerial model |
4b | AA-0172 | GPRS-GSM-GPS / Wi-Fi Module Kit - Disk Aerial model | |
4c | AA-0173 | GPRS-GSM Hermes Module Kit - Pin Aerial model | |
4d | AA-0170 | GPRS-GSM Hermes Module Kit - Disk Aerial model | |
4e | AA-0174 | Wi-Fi Hermes Module Kit - Pin Aerial model | |
4f | AA-0171 | Wi-Fi Hermes Module Kit - Disk Aerial model | |
5 | TL-46S1 | Keeper Illuminated topper | |
6 | 6a | A-CM0043 | RD-125 Power Unit with bracket |
6b | AE-0806 | RD-125 Power Unit | |
7 | S-030181-000 | Spike main wire harness | |
8 | AA-0145 | P3 Hub board | |
9 | S-030501-000 | 10p flat cable | |
10 | 10a | S-030184-000 | iPRO wire harness |
10b | S-030182-000 | VEGA wire harness | |
11 | 11a | ST1-024A-Z00 | Left frame for iPRO support |
ST1-025A-Z00 | Right frame for iPRO support | ||
ST1-026A-P00 | iPRO support bracket | ||
11b | ST1-028A-Z00 | VEGA support bracket | |
ST1-029A-Z00 | Clamp for VEGA support | ||
12 | 12a | LB-MC0E-0500 | iPRO-RC note validator |
12b | LB-MC0E-0100 | VEGA note validator | |
12b.1 | AA-0201 | VEGA-RC1 recycling unit | |
12b.2 | AA-0210 | VEGA-RC2 recycling unit | |
13 | K-02C-090030 | Hopper Evolution II MIDI + CD2 S coin sorter | |
14 | ST1-019A-Z00 | Scaffold for Evolution II | |
15 | S-030212-000 | Full level cable for capacity extension | |
16 | AA-0309 | Sector 100 1B/2C capacity extension | |
17 | 17a | K-02C-020003 | HopperOne S11 ccTalk + 10p adaptor |
17b | K-02C-040016 | AH4 Discriminator II + 10p adaptor | |
18 | SH-1B21 | CCS control board (2x16) | |
19 | ST1-011A-Z00 | Upper locking bar | |
20 | C-070103-000 | Main lock (straight latch) | |
21 | ST1-012A-Z00 | Lower locking bar | |
22 | ST1-013A-Z00 | Blind cover | |
23 | ST1-010A-V06 | Spike door | |
24 | AM-1520 | 2-position lock | |
25 | PL-MRB3-E600 | Illuminated push-button flat miniature B3 with snap-in (w/o socket) | |
26 | PM-M186 | 12 V RGB L.E.D. Mini electronic socket | |
27 | ST1-011A-V06 | Coins inlet chute | |
28 | 28a | S-050128-000 | Standard adhesive artwork |
28b | S-050128-P00 | Custom-made adhesive artwork |