Machines
Pocket CC
Pocket CC, especially designed for small/medium but profitable halls and arcades, is the only compact Cross-Changer hosting two belt-driven hoppers and the front lock in just 33,0 cm width.
Thanks to its reinforced structure provided with a solid inner bar, its 11 equidistant reinforced hooks and the sturdy padlock against burglary, Pocket CC has no rival in terms of safety and reliability. Technologically advanced, it is the best answer to every need, ensuring easy payments’ management, simple maintenance and a wide choice of custom-made options at the same time.
A sturdy slab for wall fastening is also available.
Suitable for daily changed amounts of 1.300/1.800 €
Capacity: up to 4.000 mixed coins and up to 600 banknotes
- 2x16 LCD display
- Self-configuring p.c. board connecting automatically to the built-in peripherals. Serial ccTalk protocol grants high security standards
- Stainless coin pit flap, for massive or single coins drop and lockable with key
- Key for coins’ refill to reset leftover credit and manage refill procedures when the machine is closed
- RGB push-buttons with service status color illumination
- Evolution II MIDI multi-denomination counting hopper; coins detection is enhanced by magnetic and optic sensors. CD3 S intelligent 3-way sorter, whose optic sensors check that the coins are not deviated to unwanted paths
- 2 dispensing hoppers (to be chosen between belt-driven HopperOne S11 single denomination type or disk-driven AH4 Discriminator II multi-denomination hopper with Smart Pick System).
- Capacity: up to 4.000 mixed coins, thanks to the Sector 100 hopper extension with optic detection of full/empty state
- Front latch and padlock allow to place the machine everywhere, even close to other machines
- Note validator (to be chosen between iPRO-RC, capable to recycle up to 200 banknotes [2 denominations], and to stack 400; VEGA-RC2 which recycles up to 60 banknotes [2 denominations], and stacks 30; VEGA-RC able to recycle up to 30 banknotes [1 denomination] and to stack 300
- Preset for binding chain
- Standard or custom-made artwork
Functions
- Manual (2 Xing techniques to choose between) or automatic dispensing of coins and banknotes
- Possibility to view peripheral’s service status
- Handy restoration of preset reserve of coins and banknotes
- Easy managing and display of accounting parameters
- All settings can be customized by the unit Owner/Operator
- GPRS - GSM - GPS (Geo-detection and tracking) Module Kit
- GPRS-GSM Module kit
- ARGO – Telemetry System for Remote control
- Electronic scale Libra S11
- Tutor motor-driven latch
- ACS reader
- Keeper illuminated topper
- Keyboard for menu configuration
- Universal programming kit
- Rielda re-programmable lock
- Wall-mount slab
- Transport Kit
- Coin collection bin
DIMENSIONED DRAWING
TECHNICAL SPECIFICATIONS
Size | 327 x 1542.5 x 391 mm |
Weight | 83 Kg |
Voltage | 230 Vac | 50 Hz |
Nominal power | 340 W |
Operation temperature | 0°C ÷ 50°C |
Installation | Floor standind, wall-fastening |
Recycled coins capacity | About 4.000 mixed |
Recycled banknotes capacity | Up to 200 |
Stackered banknotes capacity | Up to 400 |
Power supply unit | 1 x Power switching 340 W |
Control board | ChangeOne CCS 128K + 2x16 LCD display |
EXPLODED DRAWING
PART LIST
REF. | OPT. | COD. | DESCRIPTION |
1 | A-CM0240 | Unit core assembly with door (w/o Per. units) | |
2 | CH1-011A-V06 | Coins inlet flap | |
3 | CH1-006A-V06 | Pocket CC door | |
4 | C-070103-000 | Main look (straight latch) | |
5 | P-AM0702-10T | P3 Paper holder with serigraphy | |
6 | AA-0149 | Transport Kit (handle + wheel cart) | |
7 | 7a | CH1-016A-P00 | VEGA support bracket |
7b | CH1-020A-Z00 | iPRO support bracket | |
8 | CH1-019A-I00 | Note validator stainless-steel inlet | |
9 | AM-1507 | Return spring electronic lock | |
10 | AM-1520 | Two-way 90 degrees cylender lock | |
11 | S-030176-000 | Pocket main wire harness | |
12 | 12a | S-030182-000 | VEGA wire harness |
12b | S-030184-000 | iPRO wire harness | |
13 | AA-0317 | Libra S11 Electronic scale | |
14 | S-030501-000 | 10p flat cable | |
15 | 15a | A-CM0008 | RD-125 Power box with bracket |
15b | AE-0806 | RD-125 Power box | |
16 | SH-1B21 | CCS control board (2x16 blue display) | |
17 | K-02C-090033 | Hopper CD Evolution II ccTalk + CD3 S sorter | |
18 | 18a | LB-MC0E-0500 | iPRO-RC note validator |
18b | LB-MC0E-0100 | VEGA note validator | |
18b.1 | AA-0201 | VEGA-RC1 recycling unit | |
18b.2 | AA-0210 | VEGA-RC2 recycling unit | |
19 | 19a | K-02C-020003 | Hopper S11 ccTalk + 10p adaptor |
19b | K-02C-040016 | AH4 Discriminator II + 10p adaptor | |
20 | AA-0333 | Sector 100 1B/2T capacity extension | |
21 | S-030212-000 | Full level cable for capacity extension | |
22 | AA-0145 | P3 Hub board | |
23 | PL-MRB3-E600 | Illuminated push-button flat miniature B3 with snap-in (w/o socket) | |
24 | PM-M186 | 12V RGB L.E.D. Mini electronic socket | |
25 | CH1-007A-P00 | Upper locking bar | |
26 | CH1-008A-P00 | Lower locking bar | |
27 | CH1-009A-P00 | Blind cover | |
28 | TL-46S1 | Keeper illuminated topper | |
29 | 29a | AA-0175 | GPRS-GSM-GPS / Wi-Fi Module Kit - Pin Aerial model |
29b | AA-0172 | GPRS-GSM-GPS / Wi-Fi Module Kit - Disk Aerial model | |
29c | AA-0173 | GPRS-GSM Hermes Module Kit - Pin Aerial model | |
29d | AA-0170 | GPRS-GSM Hermes Module Kit - Disk Aerial model | |
29e | AA-0174 | Wi-Fi Hermes Module Kit - Pin Aerial model | |
29f | AA-0171 | Wi-Fi Hermes Module Kit - Disk Aerial model | |
30 | 30a | S-050125-000 | Standard adhesive artwork |
30b | S-050125-P00 | Custom-made adhesive artwork |