Machines
Pinner CC
Pinner CC is the next-generation Cross-Changer ideal for those who want maximum functionality while maintaining minimum overall dimensions.
Inside its 23 cm wide cabinet, this machine holds a powerful counting unit specially designed for the validation and massive counting of coins, composed of a single-denomination hopper integrated with a super-fast electronic coin acceptor and a motorized system for the automatic release of the coins in case of obstruction and the restoration of the correct operating status.
Thanks to its compact size and the frontal positioning of the lock, this machine allows the installation inside extremely narrow spaces, as well as the positioning side by side to other units.
Unbeatable security against break-in attempts, thanks to the steel structure of its cabinet and the internal bar equipped with eleven solid equidistant hooks, in addition to the possibility of integrating a chain or an anchoring tube, besides the possibility of fixing the machine to the wall or floor through the anchoring plates.
Capacity: up to 2,800 mixed coins and up to 600 banknotes
- 2x16 LCD Display
- Self-configuring electronic p.c. board connecting automatically to the built-in peripherals. Serial ccTalk protocol grants high security standards
- Stainless coin pit flap for massive or single coins drop, lockable with key
- Key for coins’refill to reset leftover credit and manage refill procedures when the machine is closed
- RGB push-buttons with service status color illumination
- CD Counting Unit, composed by disk-driven Hopper CD with 5 holes disk, SV electronic coin acceptor with electronic device for the automatic release of the coins. As an alternative Evolution II MIDI multi-denomination hopper with CD2 S intelligent sorter
- AH4 Discriminator II multi-denomination hopper. As an alternative HopperOne S11 single-denomination belt-driven hopper
- Capacity up to 2,800 mixed coins, thanks to Sector 200 hopper extensions with optic detection of full/empty state
- iPRO-RC note validator wich recycles 100 + 100 banknotes (2 denominations) and stacks 400. As an alternative VEGA-RC2 (30+30 recyclable banknotes – 2 denominations, 300 stacked) or VEGA-RC (30 recyclable banknotes – 1 denomination, 300 stacked)
- Armoured cabinet preset for binding chain or bar
- Solid inner bar with 11 equidistant reinforced hooks
- Front latch and padlock allow to place the machine everywhere, even close to other machines
- Standard artwork made in vinyl floor decals. Customized artwork upon request
Functions
- Functions with restricted access available from outside the unit using RFID keys with progressive enabling levels
- Manual or automatic dispensing of coins and banknotes
- Possibility to inspect the peripherals’ service status
- Handy restore of preset reserve of coins and banknotes
- Management and display of accounting and configuration data
- Display of the last ten transactions performed on the machine
- Possibility of resetting the amount of banknotes registered in the cashier only
- Hopper emptying from the outside of the unit controlled by authorized key
- Possibility to choose the denominations of banknotes and coins in which you wish to receive the change, thanks to the “Manual 3P” payment method
- Possibility to obscure on the display the amount that is loaded and counted during refill operations
- Direct withdrawal of money or on remote command
- All settings can be customized by the unit Owner/Operator
- Hermes GPRS-GSM-GPS (Geo-detection and tracking) Module Kit
- Hermes GPRS-GSM Module Kit
- ARGO - Telemetry System for remote control (only if combined with the Module Kit)
- ACS reader
- Programming station for RFID keys (only for ACS)
- RFID keys
- Keeper illuminated topper
- Keyboard for menu configuration
- Wall-mount slab
- Floor-mount slab
- Re-programmable lock
- Transport Kit
- Universal programming Kit
- Custom-made artwork
DIMENSIONED DRAWING
TECHNICAL SPECIFICATIONS
Size | 230 x 1590 x 394 mm |
Weight | 60 Kg |
Voltage | 230 Vac | 50 Hz |
Nominal power | 340 W |
Operation temperature | 0°C ÷ 50°C |
Installation | Floor standind, wall-fastening or floor-fastening |
Coins capacity |
About 2.800 (Evolution II + HopperOne S11) About 2.400 ( Evolution II + Hopper AH4) About 2.200 (CD Counting Unit + HopperOne S11) About 2.000 (CD Counting Unit + Hopper AH4) |
Recycled banknotes capacity | Up to 200 |
Stackered banknotes capacity | Up to 400 |
Power supply unit | 1 x Power switching 340 W |
Control board | ChangeOne CCS 128K + 2x16 LCD display |
EXPLODED DRAWING
PART LIST
REF. | OPT. | COD. | DESCRIPTION |
1 | A-CM0276 | Unit core assembly with door (w/o periph. units) | |
2 | 2a | ST1-037A-V06 | Floor-mount slab |
2b | AA-0151 | Wall-mount slab | |
3 | P-AM0702-10T | P3 Paper holder with serigraphy | |
4 | AA-0150 | Transport Kit (handle + wheel-cart) | |
5 | 5a | AA-0175 | GPRS-GSM-GPS / Wi-Fi Module Kit - Pin Aerial model |
5b | AA-0172 | GPRS-GSM-GPS / Wi-Fi Module Kit - Disk Aerial model | |
5c | AA-0173 | GPRS-GSM Hermes Module Kit - Pin Aerial model | |
5d | AA-0170 | GPRS-GSM Hermes Module Kit - Disk Aerial model | |
5e | AA-0174 | Wi-Fi Hermes Module Kit - Pin Aerial model | |
5f | AA-0171 | Wi-Fi Hermes Module Kit - Disk Aerial model | |
6 | TL-46S1 | Keeper illuminated topper | |
7 | 7a | A-CM0047 | RD-125 Power Unit with bracket |
7b | AE-0806 | RD-125 Power Unit | |
8 | S-030196-010 | Pinner main wire harness | |
9 | AA-0145 | P3 Hub board | |
10 | S-030501-000 | 10p flat cable | |
11 | 11a | S-030184-000 | iPRO wire harness |
11b | S-030182-000 | VEGA wire harness | |
12 | 12a | ST1-024A-Z00 | Left frame for iPRO support |
12a | ST1-025A-Z00 | Right frame for iPRO support | |
12a | ST1-026A-P00 | iPRO support bracket | |
12b | ST1-028A-Z00 | VEGA support bracket | |
12b | ST1-029A-Z00 | Clamp for VEGA support | |
13 | 13a | LB-MC0E-0500 | iPRO-RC note validator |
13b | LB-MC0E-0100 | VEGA note validator | |
13b.1 | AA-0201 | VEGA-RC recycling unit | |
13b.2 | AA-0210 | VEGA-RC2 recycling unit | |
14 | 14a | A-CM0063 | CD Counting Unit (CD + SV) |
14b | K-02C-090030 | Hopper Evolution II MIDI + CD2 S coin sorter | |
15 | S-030212-000 | Full level cable for capacity extension | |
16 | AA-0331 | Sector 200 1T/2B capacity extension | |
17 | K-02C-040016 | AH4 Discriminator II + 10p adaptor | |
18 | ST1-011A-V06 | Coins inlet chute | |
19 | SH-5B21 | CCS electronic control board (2x16 blue display) | |
20 | SA1-011A-Z00 | Upper locking bar | |
21 | C-070103-000 | Main lock (straight latch) | |
22 | SA1-012A-Z00 | Lower locking bar | |
23 | SA1-013A-Z00 | Blind cover | |
24 | SA1-010A-V06 | Pinner door | |
25 | AM-1520 | Two-way 90 degrees cylinder lock | |
26 | CH-BC01 | ACS Round module ccTalk/Pulse | |
27 | PL-MRB3-E600 | Illuminated push-button flat miniature B3 with snap-in (w/o socket) | |
28 | PM-M186 | 12 V RGB L.E.D. socket | |
29 | 29a | S-050132-000 | Standard adhesive artwork |
29b | S-050132-P00 | Custom-made adhesive artwork |