Machines
Pin CC
The brand-new Cross-Changer Pin CC is suitable to combine a timeless design to minimal volumes, with the extraordinary versatility of Alberici’s components.
Pin CC stands out for the possibility to install as an alternative to the classic multi-denomination counting hopper, a single-denomination hopper integrated with electronic coin Xor for validation and massive coins drop.
Furthermore this compact and solid machine, only 23 cm thin, may be placed virtually anywhere thanks to its front lock and front loop for sturdy padlock.
Pin CC also provides an excellent protection against theft and breaking attempts, thanks to its solid inner bar with 11 equidistant reinforced hooks and its mechanical set up for binding chain (through the holes at its base) and for optional slabs (to be fastened to the wall/floor).
Suitable for daily changed amounts of 1.200/1.500 €
- 2x16 LCD Display
- Self-configuring p.c. board connecting automatically to the built-in peripherals. Serial ccTalk protocol grants high security standards
- Stainless coin pit flap, for massive or single coins drop and lockable with key
- Key for coins’ refill to reset leftover credit and manage refill procedures when the machine is closed
- RGB push-buttons with service status color illumination
- Evolution II MIDI multi-denomination counting hopper; coins detection is enhanced by magnetic and optic sensors. CD2 S intelligent 2-way sorter, whose optic sensors check that the coins are not deviated to unwanted paths
As an alternative, Counting Unit, composed by disk-driven Hopper CD with 5 holes disk and SV electronic coin Xor with electronic device for the automatic release of the coins - Dispensing hopper single denomination belt-driven HopperOne S11. As an alternative, multi-denomination disk-driven Hopper AH4 Discriminator II with Smart Pick System (optional)
- Capacity: up to 2.800 mixed coins, thanks to the Sector 200 hopper extension with optic detection of full/empty state
- Front latch and padlock allow to place the machine everywhere, even close to other machines
- Note validator: to be chosen between iPRO-RC, capable to recycle up to 200 banknotes (2 denominations) and to stack 400; VEGA-RC2 which recycles up to 60 banknotes (2 tagli) e ne stiva 300 e VEGA-RC che ricicla fino a 30 banconote (1 taglio) e ne stiva 300
- Preset for rear binding chain
Functions
- Manual or automatic distribution of coins (1 to 3 denominations) and banknotes (2 denominations)
- Easy managing and display of accounting parameters
- Possibility to view peripheral’s service status
- Handy restoration of preset reserve of coins and banknotes
- All settings can be customized by the unit Owner/Operator
- GPRS - GSM - GPS (Geo-detection and tracking) Module Kit
- GPRS-GSM Module kit
- ARGO – Telemetry System for Remote control
- ACS Reader
- Tutor – Electronic security latch (only with VEGA notes validator)
- Keeper - Illuminated topper
- Electronic Scale - Libra S11
- Wall-mount slab
- Floor-mount slab
- Keyboard for menu configuration
- Coin collection bin
- Binding bar or chain
- Rielda re-programmable lock
- Transport Kit
- Standard or custom-made artwork
DIMENSIONED DRAWING
TECHNICAL SPECIFICATIONS
Size | 230 x 1590 x 394 mm |
Weight | 60 Kg |
Voltage | 230 Vac | 50 Hz |
Nominal power | 340 W |
Operation temperature | 0°C ÷ 50°C |
Installation | Floor standing (wall/floor-mount slabs) |
Recycled coins capacity | About 2.800 (Evolution II and Hopper S11) - about 2.400 (Evolution II and Hopper AH4) - about 2.200 (Counting Unit and HopperOne S11) - about 2.000 (Counting Unit and Hopper AH4) |
Recycled banknotes capacity | Up to 200 |
Stackered banknotes capacity | Up to 400 |
Power supply unit | Power switching 340 W |
Control board | ChangeOne CCS 128K + LCD display 2x16 |
EXPLODED DRAWING
PARTS LIST
REF. | OPT. | COD. | DESCRIPTION |
1 | A-CM0310 | Unit core assembly with door (w/o periph. units) | |
2 | ST1-037A-V06 | Floor-mount slab | |
3 | P-AM0702-10T | P3 Paper holder with serigraphy | |
4 | AA-0150 | Transport Kit (handle + wheel-cart) | |
5 | 5a | AA-0175 | GPRS-GSM-GPS / Wi-Fi Module Kit - Pin Aerial model |
5b | AA-0172 | GPRS-GSM-GPS / Wi-Fi Module Kit - Disk Aerial model | |
5c | AA-0173 | GPRS-GSM Hermes Module Kit - Pin Aerial model | |
5d | AA-0170 | GPRS-GSM Hermes Module Kit - Disk Aerial model | |
5e | AA-0174 | Wi-Fi Hermes Module Kit - Pin Aerial model | |
5f | AA-0171 | Wi-Fi Hermes Module Kit - Disk Aerial model | |
6 | TL-46S1 | Keeper illuminated topper | |
7 | 7a | A-CM0047 | RD-125 Power Unit with bracket |
7b | AE-0806 | RD-125 Power Unit | |
8 | S-030196-000 | Pin main wire harness | |
9 | AA-0145 | P3 Hub board | |
10 | S-030501-000 | 10p flat cable | |
11 | 11a | S-030184-000 | iPRO wire harness |
11b | S-030182-000 | VEGA wire harness | |
12 | 12a | ST1-024A-Z00 | Left frame for iPRO support |
ST1-025A-Z00 | Right frame for iPRO support | ||
ST1-026A-P00 | iPRO support bracket | ||
12b | ST1-028A-Z00 | VEGA support bracket | |
ST1-029A-Z00 | Clamp for VEGA support | ||
13 | 13a | LB-MC0E-0500 | iPRO-RC note validator |
13b | LB-MC0E-0100 | VEGA note validator | |
13b.1 | AA-0201 | VEGA-RC1 recycling unit | |
13b.2 | AA-0210 | VEGA-RC2 recycling unit | |
14 | 14a | A-CM0063 | CD Counting Unit (CD + SV) |
14 | 14b | K-02C-090030 | Hopper Evolution II MIDI + CD2 S coin sorter |
15 | S-030212-000 | Full level cable for capacity extension | |
16 | AA-0331 | Sector 200 1T/2B capacity extension | |
17 | 17a | K-02C-020003 | HopperOne S11 ccTalk + 10p adaptor |
17b | K-02C-040016 | AH4 Discriminator II + 10p adaptor | |
18 | AA-0317 | Libra S11 Electronic scale | |
19 | SH-1B21 | CCS electronic control board (2x16 blue display) | |
20 | SA1-011A-Z00 | Upper locking bar | |
21 | C-070103-000 | Main lock (straight latch) | |
22 | SA1-012A-Z00 | Lower locking bar | |
23 | SR-C100 | Tutor electronic motor latch | |
24 | SA1-013A-Z00 | Blind cover | |
25 | SA1-010A-V06 | Pin door | |
26 | AM-1520 | Two-way 90 degrees cylinder lock | |
27 | CH-BC01 | ACS Round module ccTalk/Pulse | |
28 | PL-MRB3-E600 | Illuminated push-button flat miniature B3 with snap-in (w/o socket) | |
29 | PM-M186 | 12 V RGB L.E.D. Mini electronic socket | |
30 | ST1-011A-V06 | Coins inlet chute | |
31 | 31a | S-050132-000 | Standard adhesive artwork |
31b | S-050132-P00 | Custom-made adhesive artwork |