Machines
Nismo CC
Nismo CC, especially designed for small/medium but profi table halls and arcades, is characterized by the revolutionary Aventador Counting Unit; whenever it works, cleaning operations within it automatically start, in order to avoid possible jamming. The innovative frontal shutter allows to directly access to the Counting Unit, so to be able to easily and autonomously manage cleaning operations and restore, without any need for a technician to go fi x the matter on-site. Nismo CC is endowed with 2 coin hoppers and a 5” graphic display. Furthermore, it guarantees high security standard, thanks to the reinforced latching points enhanced by 12 locking hooks.
Capacity: up to 4.000 mixed coins and 600 banknotes
- 5” graphic display
- Self-configuring p.c. board connecting automatically to the built-in peripherals. Serial ccTalk protocol grants high security standards
- Stainless coin pit flap, for massive or single coins drop and lockable with key
- Additional frontal shutter for easier maintenance
- Counting Unit Aventador, composed by Hopper Aventador, SV electronic coin acceptor with electronic reject device and intelligent sorter iS1 with optical sensors on each outlet path to verify coin transit
- Key for coins’ refill to reset leftover credit and manage refill procedures when the machine is closed
- RGB push-buttons with service status color illumination
- 1 single-denomination belt-driven HopperOne S11 and 1 multi-denomination Hopper AH4 Discriminator II. As an alternative 2 single-denomination HopperOne S11
- Capacity: up to 4.000 mixed coins, thanks to the Sector 100 hopper extension with optic detection of full/empty state
- Latch and padlock front placed to allow the machines to be pulled together
- iPRO-RC note validator: capable to recycle up to 100 + 100 banknotes (2 denominations) and stacks 400
- Solid inner bar with 12 equidistant reinforced hooks
- Preset for binding chain
Functions
- Manual (2 selecting techniques to choose between) or automatic dispensing of coins and banknotes
- Possibility to inspect the peripherals’ service status
- Handy restore of preset reserve of coins and banknotes
- Easy managing and display of accounts parameters
- All settings can be customized by the unit Owner/Operator
- Maintenance can be facilitated by the frontal shutter
- Hermes GPRS-GSM-GPS (Geo-detection and tracking) Module Kit
- Hermes GPRS-GSM Module Kit
- ARGO - Telemetry System for remote control (only if combined with the Module Kit)
- Tutor motor-driven latch
- Libra S11 electronic scale
- ACS reader
- Programming station for RFID keys (only for ACS)
- RFID keys
- Keeper illuminated topper
- Keyboard for menu configuration
- Wall-mount slab
- Re-programmable lock
- Transport Kit
- Universal programming Kit
- Custom-made artwork
DIMENSIONED DRAWING
TECHNICAL SPECIFICATIONS
Size | 347 x 1675 x 394 mm |
Weight | 92 Kg |
Voltage | 230 Vac | 50 Hz |
Nominal power | 340 W |
Operation temperature | 0°C ÷ 50°C |
Installation | Floor standing, wall-fastening |
Recycled coins capacity | 4.000 |
Recycled banknotes capacity | Up to 200 for each note validator |
Stacked banknotes capacity | Up to 400 for each note validator |
Power supply unit | Power switching 340 W |
EXPLODED DRAWING
PART LIST
REF. | OPT. | COD. | DESCRIPTION |
1 | AV1-M01A-V06 | Cabinet | |
2 | A-CM0054 | RD-125 Power Unit with bracket | |
3 | P-AM0702-10T | P3 Paper holder with serigraphy | |
4 | TL-46S1 | Keeper illuminated topper | |
5 | 5a | AA-0175 | GPRS-GSM-GPS / Wi-Fi Module Kit - Pin Aerial model |
5b | AA-0172 | GPRS-GSM-GPS / Wi-Fi Module Kit - Disk Aerial model | |
5c | AA-0173 | GPRS-GSM Hermes Module Kit - Pin Aerial model | |
5d | AA-0170 | GPRS-GSM Hermes Module Kit - Disk Aerial model | |
5e | AA-0174 | Wi-Fi Hermes Module Kit - Pin Aerial model | |
5f | AA-0171 | Wi-Fi Hermes Module Kit - Disk Aerial model | |
6 | K-02C-0A0101 | Aventador Counting Unit (Hopper Aventador + electronic reject device + SV + iS1 Intelligent coin sorter) | |
7 | AV1-M03-0V03 | Hopper fixing bracket | |
8 | AV1-M02A-Z00 | Aventador fixing bracket | |
9 | AA-0145 | P3 Hub board | |
10 | AM-1520 | Two-way 90 degrees cylender lock | |
11 | S-030212-000 | Full level cable for capacity extension | |
12 | S-030501-000 | 10p flat cable | |
13 | S-030184-000 | iPRO wire harness | |
14 | AM-1509 | Safety lock (flat key) | |
15 | C-070103-000 | Main lock (straight latch) | |
16 | AV1-M05A-Z00 | Sliding rail shelf | |
17 | 17a | K-02C-020076 | HopperOne S11 ccTalk (w/o sliding base) + Sector 100 Extension |
17b | K-02C-020051 | Hopper AH4 Discriminator II (w/o sliding base) + Sector 100 Extension | |
18 | LB-MC0E-0500 | IPRO-RC note validator | |
19 | CH1-020A-Z00 | iPRO support bracket | |
20 | AV1-S09A-Z00 | Upper locking bar | |
21 | AV1-S08A-Z00 | Lower locking bar | |
22 | AV1-S10A-Z00 | Blind cover | |
23 | SH-1C41-0010 | CCG electronic control board (5" blue display) | |
24 | CH1-019A-I00 | Stainless-steel inlet | |
25 | A-CM0228 | Coin locker set | |
26 | AV1-S05A-V06 | Nismo door | |
27 | PM-M186 | RGB L.E.D. mini electronic socket | |
28 | 28a | PL-MRB3-E600 | Illuminated push-button flat miniature B3 with snap-in (w/o socket) |
28b | PL-MRB3-E60H | Illuminated push-button flat miniature B3 with snap-in (with socket) | |
29 | 29a | AM-1507 | Electrical cylender T lock with return spring |
29b | CH-BC01 | ACS Round module ccTalk/Pulse | |
30 | 30a | S-050152-000 | Standard adhesive artwork |
30b | S-050152-P00 | Custom-made adhesive artwork |