Change Machines
Pin CM
New Pin CM Money Changer is designed to resist against theft and breaking attempts. Thanks to its 2,5 mm thick cabinet with one solid inner bar, compact with 11 equidistant reinforced hooks, the front loop for sturdy padlock and serial ccTalk communication, as well as a solid anti-pounding base, Pin CM grants high security performances.
In addition, it is preset for binding chain and can be also fastened to the wall and/or to the floor by its optional steel slabs.
This 23 cm thin machine can be easily placed everywhere thanks to its front latch and padlock.
Pin CM is designed to ensure easy access to peripheral devices as well as simple maintenance: refill is particularly easy thanks to its hopper extensions.
Smart control of stocked cash can be easily programmed and and pre-setting for Argo Telemetry system for remote auditing and service check can be installed as an option.
- 2x16LCD display
- Self-configuring p.c. board connecting automatically to the built-in peripherals. Serial ccTalk protocol grants high security standards
- AL66 S Electronic coin selector, with magnetic sensors and optical detector to assure extreme accuracy in coin discrimination as well as counterfeits rejection; also with optic pairs and mechanical devices against fishing, fraud and tamper
- Key for refill that allows to reset leftover credit and to manage refill procedures when machine is closed
- 2 RGB push-buttons with service status color illumination
- Dispensing hopper: HopperOne S11 single-denomination belt-driven, upon request multi-denomination Hopper AH4 Discriminator II
- Capacity: up to 2.800 mixed coins, thanks to the Sector 200 hopper extension with optic detection of full/empty state
- Front latch and padlock allow to place the machine everywhere, even close to other machines
- OryOne UN1 note validator with stacker and anti-fishing device. 300 stackable banknotes
- Preset for binding chain
Functions
- Manual or automatic distribution of coins
- Possibility to view peripherals service status
- Manual refill made simple; smart control of reserve stock
- Easy managing and display of accounting parameters
- All settings can be customized by the unit Owner/Operator
- GPRS - GSM - GPS (Geo-detection and tracking) Module Kit
- GPRS-GSM Module kit
- ARGO – Telemetry System for Remote control (if combined to a Module Kit)
- Keeper illuminated topper
- Keyboard for menu configuration
- Rielda re-programmable lock
- Wall-mount slab
- Floor-mount slab
- Transport kit
- Custom-made artwork
- Binding chain or bar
- Coin collection bin
DIMENSIONED DRAWING
TECHNICAL SPECIFICATIONS
Size | 230x1505x350 (piede 390) mm |
Weight | 57 Kg |
Voltage | 110 - 230 Vac | 50 Hz |
Nominal power | 340 W |
Operation temperature | 0°C ÷ 50°C |
Installation | Floor standing (wall/floor-mount slabs) |
Recycled coins capacity | Up to 2.800 |
Stackered banknotes capacity | Up to 300 |
Power supply unit | Power switching 340 W |
Control board | ChangeOne CMS 128K + LCD display 2x16 |
EXPLODED DRAWING
PARTS LIST
REF. | OPT. | COD. | DESCRIPTION |
1 | A-CM0274 | Unit core assembly with door (w/o periph. units) | |
2 | ST1-037A-V06 | Floor-mount slab | |
3 | P-AM0702-10T | P3 Paper holder with serigraphy | |
4 | AA-0150 | Transport Kit (handle + wheel cart) | |
5 | 5a | AA-0175 | GPRS-GSM-GPS / Wi-Fi Module Kit - Pin Aerial model |
5 | 5b | AA-0172 | GPRS-GSM-GPS / Wi-Fi Module Kit - Disk Aerial model |
5 | 5c | AA-0173 | GPRS-GSM Hermes Module Kit - Pin Aerial model |
5 | 5d | AA-0170 | GPRS-GSM Hermes Module Kit - Disk Aerial model |
5 | 5e | AA-0174 | Wi-Fi Hermes Module Kit - Pin Aerial model |
5 | 5f | AA-0171 | Wi-Fi Hermes Module Kit - Disk Aerial model |
6 | TL-46S1 | Keeper illuminated topper | |
7 | 7a | A-CM0047 | RD-125 Power Unit with bracket |
7 | 7b | AE-0806 | RD-125 Power Unit |
8 | S-030196-000 | Pin main wire harness | |
9 | AA-0145 | P3 Hub board | |
10 | S-030501-000 | 10p flat cable | |
11 | C-071001-000 | Pair of guide rails | |
12 | ST1-030A-Z00 | Bracket for OryOne UN1 | |
12 | ST1-031A-Z00 | Fastener for rails | |
13 | S-030189-000 | OryOne UN1 wire harness | |
14 | LB-MU02 | OryOne UN1 note validator | |
15 | SA1-027A-Z00 | Coinbox shelf | |
16 | AM-1305 | Coin box "A" | |
17 | S-030212-000 | Full level cable for capacity extension | |
18 | AA-0331 | Sector 200 1C/2T capacity extension | |
19 | 19a | K-02C-020003 | HopperOne S11 ccTalk + 10p adaptor |
19 | 19b | K-02C-040016 | AH4 Discriminator II + 10p adaptor |
20 | AA-0317 | Libra S11 Electronic scale | |
21 | CH1-018A-V06 | Coin acceptor support plate | |
22 | GE-66SU | AL66 S mod. ccTalk electronic coin acceptor | |
23 | SH-1A21 | CMS electronic control board (2x16 blue display) | |
24 | SA1-011A-Z00 | Upper locking bar | |
25 | C-070103-000 | Main lock (straight latch) | |
26 | SA1-012A-Z00 | Lower locking bar | |
27 | SA1-013A-Z00 | Blind cover | |
28 | SA1-010A-V06 | Pin door | |
29 | AM-1520 | Two-way 90 degrees cylinder lock | |
30 | CH-BC01 | ACS Round module ccTalk/Pulse | |
31 | PL-MRB3-E600 | Illuminated push-button flat miniature B3 with snap-in (w/o socket) | |
32 | PO-C4A1-Z000 | 12 V RGB L.E.D. Mini electronic socket | |
33 | 33a | S-050131-000 | Standard adhesive artwork |
33 | 33b | S-050131-P00 | Custom-made adhesive artwork |
34 | IM-N000-0L10 | PP inner bracket for coin acceptor |